View source for Template:P3245LV Disassemble The Camera

===Disassemble the Camera===
#Locate the network drop above the ceiling. It should be terminated with a male Ethernet end (service loop) or a biscuit jack. This line will have been ran back to the POE switch. 
#:''Note:'' If the switch does not have POE, a POE injector will need to be installed at the network closet.
#Using the T20 bit, remove the dome from the 3245. 
#:[[File:3245UnassembledDome.jpg|link=https://ipivs.com/wiki/images/6/6f/3245UnassembledDome.jpg]]
#Remove the camera from the mounting plate. 
#:[[File:3245MountPlate.jpg|link=https://ipivs.com/wiki/images/e/ec/3245MountPlate.jpg]]