View source for NFS Storage

The following instructions will configure the Valt appliance to store videos on a NFS share.

'''WARNING: This instructions will remove any previously recorded videos. This should only be performed with a new Valt installation.'''

''If you need to perform this operation on an existing Valt server, you '''must''' copy the contents of /usr/local/WowzaStreamingEngine/content to your NFS share before proceeding.'' 

# Connect to the server via SSH or log in to the teminal
# Type '''sudo apt-get install  nfs-common''' and press enter.
#: [[File:Storage4.png]]
# When prompted, enter '''Y''' to confirm installation of the package.
# Type '''sudo nano /etc/fstab''' and press enter.
#: [[File:Install45.png]]
# Delete the line that mounts the local hard drive in /usr/local/WowzaStreamingEngine/content. It will most likely be the last line in fstab
# Add a line for the NFS share. It should read similar to the following:
#: ''servername:nfspath'' /usr/local/WowzaStreamingEngine/content	nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800	0	2
#: Replace the italicized text with the appropriate information for your environment.
#: EX: ivsnas.ipivs.com:/var/nfs/vidshare  /usr/local/WowzaStreamingEngine/content   nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0
#: [[File:Storage5.png]]
# Press '''CTRL-X'''
# Enter Y to save.
# Do not change the file name and press enter
# Type '''sudo mount -a''' and press enter.
#: [[File:Storage3.png]]
# Type '''sudo /usr/local/valt/bin/Storage''' and press enter
#: ''In some installation the Storage script may be located at /home/ivsadmin/ValtInstall/Storage. If the script is not in either location, please contact IVS technical support for assistance.
''
The Valt appliance should now be configured to store all videos on an NFS share.