2 x 2 Configuration - Revision history

IVSWikiBlue: /* Tesira Software */

2022-05-10T15:14:54Z

‎Tesira Software

IVSWikiBlue: /* Physical Wiring/Line Diagram */

2022-05-10T15:12:09Z

‎Physical Wiring/Line Diagram

IVSWikiBlue at 15:55, 20 May 2020

2020-05-20T15:55:29Z

IVSWikiBlue: /* Connections */

2020-05-05T20:13:25Z

‎Connections

IVSWikiBlue: /* Physical Wiring/Line Diagram */

2020-05-05T20:11:29Z

‎Physical Wiring/Line Diagram

IVSWikiBlue at 18:22, 27 April 2020

2020-04-27T18:22:52Z

IVSWikiBlue: /* EQ and Compression */

2020-04-27T18:21:16Z

‎EQ and Compression

IVSWikiBlue: /* EQ and Compression */

2020-04-27T18:20:38Z

‎EQ and Compression

IVSWikiBlue: /* Processing Blocks in Tesira */

2020-04-27T17:59:01Z

‎Processing Blocks in Tesira

IVSWikiBlue at 17:56, 27 April 2020

2020-04-27T17:56:27Z

@@ Line 30: / Line 30: @@
 When this is complete, the file should look something like this:
-[[File:Two_to_Two_Config.png|link=]]
+{{img | file = Two_to_Two_Config.png}}
 ==Matrix Mixer==
-[[File:Two_to_Two_with_Mixer.png|link=]]
+{{img | file = Two_to_Two_with_Mixer.png}}
 #The only difference between this configuration and the last, Simple Configuration with EQ and Compression, is the use of 2 input and 2 output channels.
@@ Line 44: / Line 44: @@
 For further insight about the other processing blocks and settings, refer back to the first configuration example, or click the image below:
-[[File:Processing_Blocks_Page.png|link=https://ipivs.com/wiki/Simple_Configuration#Processing_Blocks_in_Tesira]]
+{{img | file = Processing_Blocks_Page.png}}
 ==EQ and Compression==
 For information on EQ settings, or click the image below:
-[[File:EQ_Page.png|link=https://ipivs.com/wiki/EQ_Processing]]
+{{img | file = EQ_Page.png}}
 For Compression parameters, click the image below:
-[[File:Compression_Page.png|link=https://ipivs.com/wiki/Compression_Settings]]
+{{img | file = Compression_Page.png}}

@@ Line 5: / Line 5: @@
 Use inputs 1&2 and outputs 1&2 to keep things simple. When terminating the cables, the mics will go into Orange Inputs 1&2 and the audio line to the cameras will go into Black Outputs 1&2.
-[[File:Two_Config_Line_Diagram.png|link=https://ipivs.com/wiki/images/f/ff/Two_Config_Line_Diagram.png|500px]]
+{{img | file = Two_Config_Line_Diagram.png | width=500px}}
 =Tesira Software=

@@ Line 30: / Line 30: @@
 When this is complete, the file should look something like this:
-[[File:Two_to_Two_Config.png]]
+[[File:Two_to_Two_Config.png|link=]]
 ==Matrix Mixer==
-[[File:Two_to_Two_with_Mixer.png]]
+[[File:Two_to_Two_with_Mixer.png|link=]]
 #The only difference between this configuration and the last, Simple Configuration with EQ and Compression, is the use of 2 input and 2 output channels.

@@ Line 10: / Line 10: @@
 ==Connections==
-# Once we've completed our physical connections, open the Tesira software and start building a configuration.
+# If the physical connections are complete, open the Tesira software and start building a configuration.
-# In this configuration we'll be using the following blocks. Add these blocks to the configuration:
+# In this configuration use the following blocks:
 #* TesiraFORTE CI block
 #* Peak Meter x 3
@@ Line 19: / Line 19: @@
 #* Matrix Mixer with at least 2 inputs and 2 outputs, with one extra output
 #Connect the blocks as follows:
-#* The Tesira Input block will already be connected to the AEC block, so connect the first peak meter to the Input block also. This will help us to be sure we have the proper levels set on the preamp.
+#* The Tesira Input block will already be connected to the AEC block, so connect the first peak meter to the Input block also. This will help ensure proper levels are set on the preamp.
 #* Connect the AEC block channels 1&2 to the Uber Filters.
 #* Send the Uber Filters to the Level Block.
 #* Send the Level Block to the Compressor and the second peak meter.
 #* Send the Compressor to the Matrix Mixer.
-#* Connect output 1&2 from the mixer to port 1&2 on the Tesira Output block AND to the third peak meter. This way we can make sure to reach the right audio levels before we send it to the cameras.
+#* Connect output 1&2 from the mixer to port 1&2 on the Tesira Output block AND to the third peak meter. This will ensure the right audio levels are sent to the camera.
-#* Connect the extra output from the Matrix Mixer to the AEC reference. We will not need to activate the Automatic Echo Cancellation feature in this example. However, Tesira will not allow us to delete the AEC reference block. It also will not compile the configuration if any blocks are not connected (including the AEC reference block.) So, I’d recommend using an extra output from the mixer as a "dummy output" channel. We will not send any audio to this channel.
+#* Connect the extra output from the Matrix Mixer to the AEC reference. The Automatic Echo Cancellation feature will not be used in this example. However, the AEC reference block cannot be deleted from the configuration. It also will not compile the configuration if any blocks are not connected (including the AEC reference block.) So use the extra output from the mixer as a "dummy output" channel. Do not send any audio to this channel.
-When we're complete, our file should look something like this:
+When this is complete, the file should look something like this:
 [[File:Two_to_Two_Config.png]]
 ==Matrix Mixer==

@@ Line 3: / Line 3: @@
 =Physical Wiring/Line Diagram=
-Again, we can use whichever inputs and outputs we’d like, so let’s use inputs 1&2 and outputs 1&2 to keep things simple. When we terminate our cables, the mics will go into Orange Inputs 1&2 and the audio line to the cameras will go into Black Outputs 1&2.
+Use inputs 1&2 and outputs 1&2 to keep things simple. When terminating the cables, the mics will go into Orange Inputs 1&2 and the audio line to the cameras will go into Black Outputs 1&2.
 [[File:Two_Config_Line_Diagram.png|link=https://ipivs.com/wiki/images/f/ff/Two_Config_Line_Diagram.png|500px]]

← Older revision		Revision as of 18:21, 27 April 2020
Line 50:		Line 50:

	For information on EQ settings, or click the image below:		For information on EQ settings, or click the image below:
−	[[File:~~One_Complex_Config~~.png\|link=https://ipivs.com/wiki/Simple_Configuration_with_EQ_and_Compression#Processing_Blocks_in_Tesira]]	+	[[File:EQ_Page.png\|link=https://ipivs.com/wiki/Simple_Configuration_with_EQ_and_Compression#Processing_Blocks_in_Tesira]]
		+
		+
		+
		+	For

@@ Line 49: / Line 49: @@
 ==EQ and Compression==
-For information on EQ settings and compression, refer to Simple Configuration with EQ and Compression, or click the link below:
+For information on EQ settings, or click the image below:
 [[File:One_Complex_Config.png|link=https://ipivs.com/wiki/Simple_Configuration_with_EQ_and_Compression#Processing_Blocks_in_Tesira]]

← Older revision		Revision as of 17:56, 27 April 2020
Line 44:		Line 44:

	For further insight about the other processing blocks and settings, refer back to the first configuration example, or click the image below:		For further insight about the other processing blocks and settings, refer back to the first configuration example, or click the image below:
−	[[File:~~Simple_Config~~.png\|link=https://ipivs.com/wiki/Simple_Configuration#Processing_Blocks_in_Tesira]]	+	[[File:Processing_Blocks_Page.png\|link=https://ipivs.com/wiki/Simple_Configuration#Processing_Blocks_in_Tesira]]