Speaker Selector Configuration - Revision history

IVSWikiBlue: /* Tesira Software */

2022-05-10T15:43:44Z

‎Tesira Software

2022-05-10T15:39:34Z

‎Physical Wiring/Line Diagram

2020-11-10T14:12:01Z

‎Connections

2020-11-09T22:15:36Z

‎Connections

2020-11-09T22:14:49Z

2020-11-09T22:12:06Z

‎Connections

2020-11-09T22:10:23Z

‎Connections

2020-11-09T22:04:39Z

‎Connections

2020-11-09T21:59:22Z

‎Description/Objective

2020-05-20T15:59:49Z

@@ Line 35: / Line 35: @@
 When this is complete, the file should look something like this:
-[[File:Tesira_Speaker_Selector_Config_3.png|link=]]
+{{img | file = Tesira_Speaker_Selector_Config_3.png}}
 ==Creating a Canvas User Interface==
@@ Line 41: / Line 41: @@
 In another section, we will build the corresponding Canvas UI configuration for the Speaker Selector. Click the image below:
-[[File:Canvas_Section.png|link=https://ipivs.com/wiki/User_Interface_Speaker_Selector]]
+{{img | file = Canvas_Section.png}}
 ==Processing Blocks in Tesira==
@@ Line 47: / Line 47: @@
 For further insight about the other processing blocks and settings, refer back to the first configuration example, or click the image below:
-[[File:Processing_Blocks_Page.png|link=https://ipivs.com/wiki/Simple_Configuration#Processing_Blocks_in_Tesira]]
+{{img | file = Processing_Blocks_Page.png}}
 ==EQ and Compression==
@@ Line 53: / Line 53: @@
 For information on EQ settings, or click the image below:
-[[File:EQ_Page.png|link=https://ipivs.com/wiki/EQ_Processing]]
+{{img | file = EQ_Page.png}}
@@ Line 59: / Line 59: @@
 For Compression parameters, click the image below:
-[[File:Compression_Page.png|link=https://ipivs.com/wiki/Compression_Settings]]
+{{img | file = Compression_Page.png}}

@@ Line 5: / Line 5: @@
 Below is the physical wiring diagram.
-[[File:CRAS_Speaker_Selector_Line_Diagram.png|link=https://ipivs.com/wiki/images/4/42/CRAS_Speaker_Selector_Line_Diagram.png|800px]]
+{{img | file = CRAS_Speaker_Selector_Line_Diagram.png | width=800px}}
 =Tesira Software=

@@ Line 35: / Line 35: @@
 When this is complete, the file should look something like this:
-[[File:Tesira_Speaker_Selector_Config_2.png|link=]]
+[[File:Tesira_Speaker_Selector_Config_3.png|link=]]
 ==Creating a Canvas User Interface==

@@ Line 30: / Line 30: @@
 #* Connect outputs 4 & 5 from the Matrix Mixer to the AEC Reference.
-# Matrix Mixer: The sim room mic will be sent to three places; the camera, the control room speaker, and the AEC reference for the push to talk mic. The push to talk mic will be sent 3 places; the camera, the Standard Mixer (renamed 'speaker selector in this config), and the AEC reference for the room mic.
+# Matrix Mixer: The sim room mic will be sent to three places; the camera, the control room speaker, and the AEC reference for the push to talk mic. The push to talk mic will be sent 3 places; the camera, the Standard Mixer (renamed 'speaker selector' in this config), and the AEC reference for the room mic.
 # The Standard Mixer sends the push to talk audio to two places; the overhead speaker and the PSP in-wall patient speaker.

@@ Line 27: / Line 27: @@
 #* Connect outputs 1 & 2 from the Matrix Mixer to the Output block and peak meter.
 #* Connect output 3 from the Matrix Mixer to the Standard Mixer.
-#* Connect the outputs from the Standard Mixer to the output block and the peak meter. Send this audio to both outputs on the Standard Mixer.
+#* Connect the outputs from the Standard Mixer to the output block and the peak meter.
 #* Connect outputs 4 & 5 from the Matrix Mixer to the AEC Reference.
 When this is complete, the file should look something like this:
 [[File:Tesira_Speaker_Selector_Config_2.png|link=]]
 ==Creating a Canvas User Interface==

@@ Line 33: / Line 33: @@
 When this is complete, the file should look something like this:
-[[File:Tesira_Speaker_Selector_Config.png|link=]]
+[[File:Tesira_Speaker_Selector_Config_2.png|link=]]
 ==Creating Presets==

@@ Line 19: / Line 19: @@
 #* Matrix Mixer with 2 inputs and 5 outputs
 #* Standard Mixer with 2 inputs and 2 outputs (this will become the microphone selector in Canvas)
-#* Preset Button with 3 presets
 #Connect the blocks as follows:
 #* Connect a peak meter to the Tesira Input block. This will help ensure proper levels are set on the preamp.
@@ Line 29: / Line 29: @@
 #* Connect the outputs from the Standard Mixer to the output block and the peak meter.
 #* Connect outputs 4 & 5 from the Matrix Mixer to the AEC Reference.

@@ Line 1: / Line 1: @@
 =Description/Objective=
-This is an example with a Control Room Audio Solution in a nursing sim lab. In this example, there are two speakers in the sim room; an OWISP overhead speaker for communication and instructions, and a PSP in-wall speaker to communicate as the dummy patient. The customer is requesting a User Interface to select the speaker for their talkback audio at a moment's notice. This means we will also build a Canvas User Interface (this will be covered in another section). Before building in Canvas, it is crucial to create the Tesira configuration properly.
+This is an example with a Control Room Audio Solution in a nursing sim lab. In this example, there are two speakers in the sim room; an overhead speaker for communication and instructions, and a PSP in-wall speaker to communicate as the dummy patient. The customer is requesting a User Interface to select the speaker for their talkback audio at a moment's notice. This means we will also build a Canvas User Interface (this will be covered in another section). Before building in Canvas, it is crucial to create the Tesira configuration properly.
 =Physical Wiring/Line Diagram=