IVSWikiBlue: /* Connecting the Microphone */

2021-03-17T19:39:07Z

‎Connecting the Microphone

IVSWikiBlue: Created page with "== Connecting the Microphone == #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic cas..."

2020-05-13T16:29:17Z

Created page with "== Connecting the Microphone == #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic cas..."

New page

== Connecting the Microphone ==
#Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic casings covering the red and black cables. Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends (See picture)
#:[[File:Stripped_22_2_Wire.JPG|400x300px]]
#Cut a hole into the drywall, large enough to fit the mud ring into it securely. Feed one end of the the 22/2 audio cable through the hole. (If mounting on a hard surface, attached Datacom box to the wall). Connect the audio cable to the Verifact-D phoenix terminal as follows;; Red to A, Black to B, Common (bare wire) to C (See Picture)
#:[[File:Verifact-D_wired_up.JPG|400x300px]]
#Connect the power cable to the IO phoenix connector (Red to 2, Black to 1).
#Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place.
#Align Verifact-D with mud ring or Datacom box and screw in securely.

@@ Line 1: / Line 1: @@
 == Connecting the Microphone ==
 #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic casings covering the red and black cables. Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends (See picture)
-#:[[File:Stripped_22_2_Wire.JPG|400x300px]]
+#:[[File:Stripped_22_2_Wire.JPG|400x300px|link=https://ipivs.com/wiki/images/5/57/Stripped_22_2_Wire.JPG]]
 #Cut a hole into the drywall, large enough to fit the mud ring into it securely.  Feed one end of the the 22/2 audio cable through the hole. (If mounting on a hard surface, attached Datacom box to the wall). Connect the audio cable to the Verifact-D phoenix terminal as follows;; Red to A, Black to B, Common (bare wire) to C (See Picture)
-#:[[File:Verifact-D_wired_up.JPG|400x300px]]
+#:[[File:Verifact-D_wired_up.JPG|400x300px|link=https://ipivs.com/wiki/images/3/3d/Verifact-D_wired_up.JPG]]
 #Connect the power cable to the IO phoenix connector (Red to 2, Black to 1).
 #Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place.
 #Align Verifact-D with mud ring or Datacom box and screw in securely.

Template:P3374 VerifactD - Revision history

IVSWikiBlue: /* Connecting the Microphone */

IVSWikiBlue: Created page with "== Connecting the Microphone == #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic cas..."