Difference between revisions of "Camera Settings"

From IVS Wiki
Jump to: navigation, search
(Created page with "The following camera settings should be enabled prior to adding the camera to the Valt system. 1) Browse to the camera address (you can find the camera address using the Axis...")
 
 
(34 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
The following camera settings should be enabled prior to adding the camera to the Valt system.
+
<div class="floating_card">Below are the settings that IVS sets when shipping out cameras.</div>
  
−
1) Browse to the camera address (you can find the camera address using the Axis IPUtility.exe application) and set the root password.
+
<table class="network_ports_table">
−
[[File:100.jpg]]
+
  <tr>
−
2) Click on the setup link in the upper left corner, then go to Basic Setup -> Video Stream -> Audio tab. Check the enable audio check box as shown below then press Save.
+
    <th>Setting</th>
−
[[File:101.jpg]]
+
    <th>Description</th>
 +
    <th>Value</th>
 +
    <th>Notes</th>
 +
  </tr>
 +
  <tr>
 +
    <td>Audio.A0.Enabled</td>
 +
    <td>Enable audio in the Axis product.</td>
 +
    <td>yes</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.InputGain</td>
 +
    <td>Applied gain (in dB) to sound sent from the Axis product.</td>
 +
    <td>0</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.OutputGain</td>
 +
    <td>Applied gain (in dB) to sound sent to the Axis product.</td>
 +
    <td>0</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.AudioSupport</td>
 +
    <td>Enable/disable audio from this audio source. If the audio source is turned off with this parameter, no audio will be transmitted even if <code>Audio.A0.Enabled=yes</code></td>
 +
    <td>yes</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.BitRate</td>
 +
    <td>The output bit rate (in bits per second).</td>
 +
    <td>32000</td>
 +
    <td><em>This setting can vary between cameras</em></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.InputType</td>
 +
    <td>The source from where the audio is captured.</td>
 +
    <td>line</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>AudioSource.A0.SampleRate</td>
 +
    <td>Clock rate (in Hz) for the audio sampling.</td>
 +
    <td>48000</td>
 +
    <td><em>This setting can vary between cameras</em></td>
 +
  </tr>
 +
  <tr>
 +
    <td>Image.I0.MPEG.PCount</td>
 +
    <td>Number of P frames that make up the GOP.</td>
 +
    <td>19</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>Image.I0.MPEG.ZStrength</td>
 +
    <td>Provides various methods for reducing the video bitrate.</td>
 +
    <td>off</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>Image.I0.Stream.FPS</td>
 +
    <td>Sets the number of Frames Per Second</td>
 +
    <td>30</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>Network.HTTP.AuthenticationPolicy</td>
 +
    <td></td>
 +
    <td>basic</td>
 +
    <td><em>Needed for many VALT accessories to work.</em></td>
 +
  </tr>
 +
  <tr>
 +
    <td>Image.I0.MPEG.H264.Profile</td>
 +
    <td></td>
 +
    <td>main</td>
 +
    <td></td>
 +
  </tr>
 +
  <tr>
 +
    <td>ImageSource.I0.Sensor.LowLatencyMode</td>
 +
    <td>Lowers image processing time.</td>
 +
    <td>on</td>
 +
    <td><em>This setting is not available on all cameras.</em></td>
 +
  </tr>
 +
 
 +
</table>
 +
 
 +
{{Section | title = Camera UI | content =
 +
* [[Camera Settings 7]]
 +
* [[Camera Settings 7+]]
 +
* [[Camera Settings Older Firmware]]
 +
}}

Latest revision as of 10:09, 17 December 2024

Below are the settings that IVS sets when shipping out cameras.
Setting Description Value Notes
Audio.A0.Enabled Enable audio in the Axis product. yes
AudioSource.A0.InputGain Applied gain (in dB) to sound sent from the Axis product. 0
AudioSource.A0.OutputGain Applied gain (in dB) to sound sent to the Axis product. 0
AudioSource.A0.AudioSupport Enable/disable audio from this audio source. If the audio source is turned off with this parameter, no audio will be transmitted even if Audio.A0.Enabled=yes yes
AudioSource.A0.BitRate The output bit rate (in bits per second). 32000 This setting can vary between cameras
AudioSource.A0.InputType The source from where the audio is captured. line
AudioSource.A0.SampleRate Clock rate (in Hz) for the audio sampling. 48000 This setting can vary between cameras
Image.I0.MPEG.PCount Number of P frames that make up the GOP. 19
Image.I0.MPEG.ZStrength Provides various methods for reducing the video bitrate. off
Image.I0.Stream.FPS Sets the number of Frames Per Second 30
Network.HTTP.AuthenticationPolicy basic Needed for many VALT accessories to work.
Image.I0.MPEG.H264.Profile main
ImageSource.I0.Sensor.LowLatencyMode Lowers image processing time. on This setting is not available on all cameras.
Camera UI
Retrieved from "https://ipivs.info/wiki/index.php?title=Camera_Settings&oldid=13682"