IVS Wiki:Privacy Rules

Getting Started

For each camera in the room:

1. Set I/O Ports
2. Set Privacy mask
3. Privacy PTZ position

---

Create Recipients

For each camera in the room, on the host camera:

1. Go to System → Events → Recipients.
2. Select Add Recipient.
3. In the Name field enter the name of the camera. If the camera is the local recipient, enter the name Self.
4. In the Type field select HTTP.
5. The URL will be in the form: http://CameraIP/axis-cgi/param.cgi Replace <CAMERA_IP> with the IP address of your camera.

Local Recipient

http://127.0.0.1/axis-cgi/param.cgi

⚠Many firmware versions will not work with 127.0.0.1. If this does not work for you, change the IP to the IP assigned to that camera.

⇧ Back to Top

---

Remote Recipient

http://<CAMERA_IP>/axis-cgi/param.cgi

If there are multiple cameras you will need to add multiple remote recipients and rules tied to those remote recipients.

INSTEAD:

For any remote/slave cameras:

• Set I/O ports
• Create privacy presets
• Create masks
• Create recipients

⚠Do not load rules. The master camera will contain all rules.

⇧ Back to Top

---

Create Events

Privacy Off

The following parameters should be used in the Action Rule Setup.

⚠Set the gain to what you need for the audio to sound loud and clear.

Custom Parameters

Name	Value
action	update
Image.I0.Overlay.MaskWindows.M0.Enabled	no
AudioSource.A0.InputGain	0
PTZ.Various.V1.PanEnabled	true
PTZ.Various.V1.TiltEnabled	true
PTZ.Various.V1.ZoomEnabled	true
autofocus	on

Image Example

⇧ Back to Top

---

Privacy On

The following parameters should be used in the Action Rule Setup.

Custom Parameters

Name	Value
action	update
Image.I0.Overlay.MaskWindows.M0.Enabled	yes
AudioSource.A0.InputGain	mute
PTZ.Various.V1.PanEnabled	false
PTZ.Various.V1.TiltEnabled	false
PTZ.Various.V1.ZoomEnabled	false

Image Example

⇧ Back to Top

---

Privacy PTZ

Click Events → Action Rules.

General

Setting	Value
Enable rule	Checked
Name	Privacy PTZ

Condition

Setting	Value
Trigger	Input Signal
Port	Digital Input 3
Start condition only	Checked
Schedule	Set to Always or a custom schedule.

Actions

Setting	Value
Type	PTZ Control
Control	Preset Position
Go to	Privacy Position (H)
(Optional) Return to home position when the rule is no longer active	Set a delay (e.g., 1 second) before returning.

Image Example

⇧ Back to Top

---

LED On

Image Example

⇧ Back to Top

---

LED Off

Image Example

⇧ Back to Top

---