|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | {{Article - Manual | content =
| |
| − | <h1>Overview</h1>
| |
| − | From time to time an IVS customer may have the need to use one of their VALT Rooms without the capacity to view live or record. Or, they may run sessions that contain sensitive information from time to time, which they do not captured in a recording. In this case, we can configure cameras for Privacy Mode, which blankets the screen with a black video overlay and omits all audio from the stream.
| |
| | | | |
| − |
| |
| − | The Privacy Switch is a customizable solution for placing VALT cameras in Privacy Mode - a physical button to engage this option.
| |
| − |
| |
| − |
| |
| − | These instructions are written for use with a camera with 4 I/O ports (6 pin phoenix connector). Port 1 and 2 (pins 3 and 4) are reserved for use with the VALT Recording Start/Stop button.
| |
| − |
| |
| − | {{hr}}
| |
| − |
| |
| − | =Compatible Cameras and Wire Diagrams=
| |
| − | The privacy switch should be usable with any AXIS camera with at least one free input and one free output. The camera must be running firmware version 5.50 or higher.
| |
| − | '''''<span style="font-size:120%;color:#383838">Click on the [[File:Axis-camerasmall.png|30px|link=]] icon to see the diagram.</span>'''''
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis P1364/65'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/e/e4/P3235_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P3235-LVE'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/b/b5/P3245_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P3245 or 3265'''</span>
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis P3301'''</span>
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis P3304'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/a/af/P3364-P3365_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P3364/P3365*'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/c/ce/P3374-P3375_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P3374-V/P3375-V*'''</span>
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis Q3504/05 MK II'''</span>
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis Q3518'''</span>
| |
| − |
| |
| − | [[File:AXIS Cam.png|30px|link=|No Current Diagram]]<span style="font-size:120%;color:#383838">'''Axis P3935-LR'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/b/b3/F41_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis F41 or F91'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/6/67/P5414-P5415_and_New_Privacy_Switch.png]]<span style="font-size:120%;color:#383838">''' Axis P5414-E/P5415-E'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/c/ce/M5525_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis M5525 or 5526'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/d/d6/P5635_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P5635-E MK II'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/3/38/P5655_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis P5655'''</span>
| |
| − |
| |
| − | [[File:Axis-camerasmall.png|30px|link=https://ipivs.info/wiki/images/7/73/Q8414_and_New_Privacy_Switch.png|Click to See Diagram]]<span style="font-size:120%;color:#383838">''' Axis Q8414-LVS*'''</span>
| |
| − |
| |
| − |
| |
| − | * These cameras can only be used with a single ancillary device (ie: Button or privacy switch). To use these with a camera that does not have 4 I/O ports, you will need to adjust the event rules.
| |
| − |
| |
| − |
| |
| − | {{Top of Page}}
| |
| − | {{hr}}
| |
| − |
| |
| − | =Required Parts and Tools=
| |
| − | {{img | file = Privacy Button On.png | width=150px}}
| |
| − | * VALT Privacy Switch and Face Plate
| |
| − | * Mud Ring or Single Gang Box
| |
| − | * Wire Cutters/Strippers
| |
| − | * 22/4 solid unshielded plenum cable
| |
| − | * Jab Saw (used to cut hole)
| |
| − | * Wire fishing poles or tape
| |
| − |
| |
| − |
| |
| − | {{Top of Page}}
| |
| − | {{hr}}
| |
| − |
| |
| − | =Installation Instructions=
| |
| − | # Determine if the button will be mounted outside the entrance of the room or at a specified location in the room.
| |
| − | # Using a stud finder, scan the mounting location to ensure the device is not mounted on a stud.
| |
| − | # Cut a hole into the drywall, large enough to fit the mud ring into it securely.
| |
| − | #: {{img | file = VerifactDring.JPG | width=170px}}
| |
| − | # Cut a hole in the wall where the privacy switch will be mounted.
| |
| − | # Insert the mud ring into the hole, and attach it.
| |
| − | # Run 22/4 from the camera to the hole.
| |
| − | # Strip the outer insulation from both ends of the 22/4.
| |
| − | #: {{img | file = Privacy1.jpg | width=375px}}
| |
| − | # Strip approximately 1/4 inch of insulation off of each wire in the 22/4 on the camera side
| |
| − | #: {{img | file = Privacy2.jpg | width=375px}}
| |
| − | # Insert the wires into the IO connector on the camera according to the chart below. (For a camera with a 4-pin I/O phoenix connector, use pins 3 and 4 instead of 5 and 6.)
| |
| − | #: {{img | file = Privacy3.jpg | width=375px}}
| |
| − | #: Pin 1: Green
| |
| − | #: Pin 2: Red
| |
| − | #: Pin 5: Yellow
| |
| − | #: Pin 6: Black
| |
| − | #:: ''See the chart at the end of this section for a direct mapping between the switch and I/O connector''
| |
| − | # Strip approximately 1/2 inch of insulation off each wire in the 22/4 on the switch side.
| |
| − | #: {{img | file = Privacy4.jpg | width=375px}}
| |
| − | # Attach the switch to the mud ring.
| |
| − | # Splice the wires to the switch according to the chart below.
| |
| − | #: {{img | file = PrivacyButton StartButton.png | width=375px}}
| |
| − |
| |
| − | * ''Connections should be made with B connectors''
| |
| − |
| |
| − | <br />
| |
| − | '''Wiring Map'''
| |
| − | <table>
| |
| − | <tr>
| |
| − | <th style="width:100px;">Privacy Switch</th>
| |
| − | <th>Lead Color</th>
| |
| − | <th>Phoenix Connector</th>
| |
| − | </tr>
| |
| − | <tr>
| |
| − | <td>Switch</td>
| |
| − | <td>Green</td>
| |
| − | <td>Pin 1</td>
| |
| − | </tr>
| |
| − | <tr>
| |
| − | <td>+</td>
| |
| − | <td>Red</td>
| |
| − | <td>Pin 2</td>
| |
| − | </tr>
| |
| − | <tr>
| |
| − | <td>Switch</td>
| |
| − | <td>Blue</td>
| |
| − | <td>Pin 5</td>
| |
| − | </tr>
| |
| − | <tr>
| |
| − | <td>-</td>
| |
| − | <td>Black</td>
| |
| − | <td>Pin 6</td>
| |
| − | </tr>
| |
| − | </table>
| |
| − |
| |
| − |
| |
| − | {{Top of Page}}
| |
| − | {{hr}}
| |
| − |
| |
| − | {{:Configuring a Privacy Switch}}
| |
| − | }}
| |
| − |
| |
| − | [[Category:Accessories]]
| |
