Difference between revisions of "Devices and Networking"

From IVS Wiki
Jump to: navigation, search
Line 12: Line 12:
  
  
===Network Settings===
+
===Device Information===
  
 
[[File:Tesira_Device_Information.png]]
 
[[File:Tesira_Device_Information.png]]
  
#Assign IP’s here
+
#Check the current firmware version
#Switch between Control and AVB
+
#System ID for user interface configuration
  
  
===Device Information===
+
===Network Settings===
  
 
[[File:Tesira_Network_Settings.png]]
 
[[File:Tesira_Network_Settings.png]]
  
#Check the current firmware version
+
#Assign IP’s here
#System ID for user interface configuration
+
#Switch between Control and AVB
  
  

Revision as of 11:06, 21 April 2020

Use the following tools to find IP and System settings and Firmware information.


Device Maintenance

Tesira Device Maintenance.png

  1. Network settings- click here to set IP's
  2. Clear configuration- we will need to do this if we are sending a brand new config to the device
  3. Update firmware. Plan for this to take between 30-60 minutes
  4. System ID for user interface configuration


Device Information

Tesira Device Information.png

  1. Check the current firmware version
  2. System ID for user interface configuration


Network Settings

Tesira Network Settings.png

  1. Assign IP’s here
  2. Switch between Control and AVB


AVB Enable

Tesira Device AVB Enable.png

  1. If we are using an AVB switch or any ancillary devices, enable AVB here