|
|
| (158 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | =Overview=
| + | [[Privacy Button 2020-Present|Privacy Button 2020-Present]] |
| − | The privacy switch is a customizable solution for placing the cameras connected to the Valt system in privacy mode. The instructions below will outline how to configure a privacy switch that will stay illuminated while the switch is in the off position. Flipping the switch to the on position will extinguish the light and engage privacy mode. The switch and LED are independent and the behavior can be customized. See the variations section at the bottom of this article for more information.
| |
| | | | |
| − | These instruction are written for use with a camera with 4 IO ports. Port 1 and 2 are reserved for use with the Valt Recording Start/Stop button.
| + | [[File:Privacy Button On.png|200px|link=Privacy Button 2020-Present|Click to Navigate to This Page]] |
| | | | |
| − | =Compatible Cameras=
| + | [[Privacy Switch 2013-2019|Privacy Switch 2013-2019]] |
| − | The privacy switch should be used with any axis camera with at least one free input and one free output. To use with a camera that does not have 4 I/O ports, you will need to adjust the event rules.
| |
| | | | |
| − | * Axis P5514
| + | [[File:PrivSwitch.png|200px|link=Privacy Switch 2013-2019|Click to Navigate to This Page]] |
| − | * Axis P5515
| |
| − | * Axis P5414
| |
| − | * Axis P5415
| |
| − | * Axis F41
| |
| − | | |
| − | '''Warning: The privacy switch is not currently compatible with the Axis P3364.'''
| |
| − | | |
| − | =Required Parts and Tools= | |
| − | * Single Pole Single Throw Switch
| |
| − | * LED (Instead of an LED you can use an illuminated switch, but it must be independent)
| |
| − | * Mud Ring or Single Gang Box
| |
| − | * Face Plate
| |
| − | * Wire Cutters/Strippers
| |
| − | * 22/4 unshielded plenum
| |
| − | =Installation=
| |
| − | # Cut a hole in the wall where the privacy switch will be mounted.
| |
| − | # Inset the mud ring into the hole and attach it.
| |
| − | # Run 22/4 from the camera to the hole.
| |
| − | =Configuration=
| |
| − | =Multiple Cameras=
| |
| − | =Variations=
| |
Latest revision as of 10:12, 14 September 2021
