Difference between revisions of "Template:Connect the Microphone Verifact A"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) (→Connecting the Microphone) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
#Using a hole saw, drill a hole at center of the ceiling tile. Feed one end of the the 22/2 cables through the hole. | #Using a hole saw, drill a hole at center of the ceiling tile. Feed one end of the the 22/2 cables through the hole. | ||
#:''Note:'' Ensure that the hole will be covered by the microphone | #:''Note:'' Ensure that the hole will be covered by the microphone | ||
| − | #: | + | #: {{img | file = VerifactACutHole.jpg | width=300px}} |
#Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. | #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. | ||
#Remove the string and plastic casings covering the red and black cables. | #Remove the string and plastic casings covering the red and black cables. | ||
#Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends. Remove ground. | #Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends. Remove ground. | ||
#At the Verifact A, connect the power cable to ports A and C. Connect the audio cable to ports B and C. | #At the Verifact A, connect the power cable to ports A and C. Connect the audio cable to ports B and C. | ||
| − | #: | + | #:{{img | file = LouroeVerifactAwires2.JPG}} |
#Using toggle bolts, secure the microphone. | #Using toggle bolts, secure the microphone. | ||
| − | #: | + | #: {{img | file = VerifactATileMount.jpg}} |
Latest revision as of 08:50, 10 May 2022
Connecting the Microphone
- Mark center of the ceiling tile the Verifact A will be mounted on.
- Using a hole saw, drill a hole at center of the ceiling tile. Feed one end of the the 22/2 cables through the hole.
- Note: Ensure that the hole will be covered by the microphone
-
- Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable.
- Remove the string and plastic casings covering the red and black cables.
- Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends. Remove ground.
- At the Verifact A, connect the power cable to ports A and C. Connect the audio cable to ports B and C.
- Using toggle bolts, secure the microphone.
-
