Bluetooth Talkback - Delete Pairings

Perform the following steps to delete any existing Bluetooth® pairings from memory.

1. If the device is not already powered on, press and hold the POWER button (#2 Above) for about 2 seconds to turn the device on. The LED (#3 above) will flash blue twice.
2. Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds to turn the device off. The LED will flash red twice.
3. Wait at least 3 seconds, then slide the TX/RX (#5 & #6 above) switch to the opposite position.
4. Press and hold the POWER button to turn the device on. The LED will flash blue twice. All Bluetooth pairings are now cleared.

⤺ Back to Main Page