IVS Wiki:VALT CUE

VALT Cue is an app that walks you through a timed recording session with on screen prompts and audio/visual cues. Cue uses your VALT system’s rooms, information templates, and assessments to create session structure that is familiar and consistent.

VALT Cue Installation

Add Cue device in VALT

1. The first step to implementing VALT Cue with your instance of VALT is setting up the device in the Settings page of VALT.
2. Navigate to the Rooms & Devices subsection and click the plus icon in the top right corner to Add Cue device.

✎You will need an additional device license for each VALT Cue device.

3. Input the appropriate Name, Media Server, and Device Type, and leave the Rooms field blank.
4. Hit the save button.

✎Be sure to navigate back to that device to take note of the Device UID, as this value will be used to connect the device to VALT later on.

---

Installing VALT Cue

Navigate to the App Store on the device. Search for IVS Cue and install the app.

---

Connecting VALT Cue to VALT

When you open the IVS Cue app, you will be prompted to Connect to a server. You will need to fill out the following values:

Server Address	Enter the IP address or FQDN of the server. It must be entered as http://<ipaddress> or https://<fqdn> if you are using SSL.
Device UID	You can obtain this by pulling up the iPad device on the VALT application's Settings page.
Username	This must be a user in the admin group.
Password

---

VALT Cue Configuration

Track Setup

Once you have synced the device to the VALT system, you will be taken to the Session track setup page.

• To Rename the current track, tap on the pencil icon and type in the new track name.
• To upload any file to be associated with the track, utilize the Upload button.
• To download the current track setup, tap the Download button.
• To make the current track looping, toggle the Loop switch.

Session Setup

To add a session to the current track, press the Create session button. You will be taken through the following three steps:

Room

On the Room step, you will be asked to fill out the following fields:

• Session name: The session name will serve as the title for this recording within VALT.
• Repetition number: Input the number of times this session will repeat before moving to the next session.
• Room: Select the Room that this session will take place in from the drop down.

Select Next to continue on to the Information section.
Select Cancel to discard the information and return to the Session track page.

Information

On the Information step, you will be asked to select which information template to use for the session and to define the fields that will be visible to the user starting the recording on Cue.

• Template: Select which Template to use from the drop down.

🕮Learn more about templates here.

• Fields: Select which Fields will be accessible from the Cue app from the drop down.
  
• Notifications:

Select Next to continue on to the Evaluation step

Evaluation template

---

Using VALT Cue