Difference between revisions of "Restarting Wowza"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) |
||
| Line 5: | Line 5: | ||
1) Enter the IP Address or URL of the Valt server, followed by ''':8088'''. Example: ''http://192.168.0.70:8088'' | 1) Enter the IP Address or URL of the Valt server, followed by ''':8088'''. Example: ''http://192.168.0.70:8088'' | ||
| − | 2) Enter the log in credentials for Wowza Manager Application. If you do not have these, please email IVS Support at support@ipivs.com | + | 2) Enter the log in credentials for Wowza Manager Application. If you do not have these, please email IVS Support at support@ipivs.com. |
[[File:Wowza2.jpg | 900px]] | [[File:Wowza2.jpg | 900px]] | ||
Revision as of 13:21, 2 May 2019
Please note restarting the Wowza engine will disconnect any active observation session and stop any active recordings. It is best to perform this reset when no recordings are in progress.
1) Enter the IP Address or URL of the Valt server, followed by :8088. Example: http://192.168.0.70:8088
2) Enter the log in credentials for Wowza Manager Application. If you do not have these, please email IVS Support at support@ipivs.com.
3) You should see the diagnostic screen shown above.
4) Click on the Server tab on top, followed by clicking the Restart button, as shown above.
5) Click OK to restart the Wowza Video Engine. After ~ 60 seconds, you should be able to log back into the Valt software, pull up cameras, and start recordings.
