Difference between revisions of "Template:3235 Drywall Mounting"
IVSWikiBlue (talk | contribs) (Created page with "===Drywall Mounting Instructions=== #Using a stud finder, scan the mount location to ensure the camera is not mounted on a stud. #Using a pencil, mark the four holes for the...") |
IVSWikiBlue (talk | contribs) (→Drywall Mounting Instructions) |
||
Line 4: | Line 4: | ||
#Using a 3/16" drill bit, drill the marked locations and | #Using a 3/16" drill bit, drill the marked locations and | ||
#Install anchors and attach the mount plate using screws and washers. | #Install anchors and attach the mount plate using screws and washers. | ||
− | #:[[File:3245Drywall2.JPG|link=https://ipivs.com/wiki/images/9/97/3245Drywall2.JPG]] | + | #:[[File:3245Drywall2.JPG|link=https://ipivs.com/wiki/images/9/97/3245Drywall2.JPG|210px]] |
#Using a hole saw or paddle bit, cut a hole centered in the wall plate where cables will pass through. | #Using a hole saw or paddle bit, cut a hole centered in the wall plate where cables will pass through. | ||
− | #:[[File:3245DrywallHole2.JPG|link=https://ipivs.com/wiki/images/f/f5/3245DrywallHole2.JPG]] | + | #:[[File:3245DrywallHole2.JPG|link=https://ipivs.com/wiki/images/f/f5/3245DrywallHole2.JPG|210px]] |
#Using the hole saw, drill a hole above the drop ceiling in line with the hole drilled where the camera is mounted. | #Using the hole saw, drill a hole above the drop ceiling in line with the hole drilled where the camera is mounted. | ||
#Cut two lengths of 22/2 long enough to reach the mounting location of the microphone. | #Cut two lengths of 22/2 long enough to reach the mounting location of the microphone. | ||
#Using glow rods or fish tape, fish the network drop or patch cable in addition to the two sections of 22/2 audio cable through the drywall. | #Using glow rods or fish tape, fish the network drop or patch cable in addition to the two sections of 22/2 audio cable through the drywall. | ||
#Attach the camera the the mount plate | #Attach the camera the the mount plate |
Revision as of 08:44, 27 August 2020
Drywall Mounting Instructions
- Using a stud finder, scan the mount location to ensure the camera is not mounted on a stud.
- Using a pencil, mark the four holes for the mount plate.
- Using a 3/16" drill bit, drill the marked locations and
- Install anchors and attach the mount plate using screws and washers.
- Using a hole saw or paddle bit, cut a hole centered in the wall plate where cables will pass through.
- Using the hole saw, drill a hole above the drop ceiling in line with the hole drilled where the camera is mounted.
- Cut two lengths of 22/2 long enough to reach the mounting location of the microphone.
- Using glow rods or fish tape, fish the network drop or patch cable in addition to the two sections of 22/2 audio cable through the drywall.
- Attach the camera the the mount plate