Difference between revisions of "Template:P3364 VerifactA"
IVSWikiBlue (talk | contribs) (Created page with "== Connecting the Microphone == #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic ca...") |
IVSWikiBlue (talk | contribs) (→Connecting the Microphone) |
||
| Line 2: | Line 2: | ||
#Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic casings covering the red and black cables. Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends (See picture) | #Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic casings covering the red and black cables. Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends (See picture) | ||
| − | #:[[File:Stripped_22_2_Wire.JPG|400x300px]] | + | #:[[File:Stripped_22_2_Wire.JPG|400x300px|link=https://ipivs.com/wiki/images/5/57/Stripped_22_2_Wire.JPG]] |
#Drill a hole into the piece of ceiling tile that you will be mounting the Louroe Verifact-A. Feed one end of the the 22/2 audio cable through the hole. Connect the audio cable to the Verifact-A phoenix terminal as follows; Red to A, Black to B, Common (bare wire) to C (See Picture) | #Drill a hole into the piece of ceiling tile that you will be mounting the Louroe Verifact-A. Feed one end of the the 22/2 audio cable through the hole. Connect the audio cable to the Verifact-A phoenix terminal as follows; Red to A, Black to B, Common (bare wire) to C (See Picture) | ||
| − | #:[[File:Wired_Verifact_A.JPG|400x300px]] | + | #:[[File:Wired_Verifact_A.JPG|400x300px|link=https://ipivs.com/wiki/images/4/4e/Wired_Verifact_A.JPG]] |
#Connect the other end of your 22/2 cable to the terminal on the IFPX labeled '''MIC/SPEAKER A B C SP'''. The connections will be as follows; Red to A, Black to B, Common (bare wire) to C (See Picture) | #Connect the other end of your 22/2 cable to the terminal on the IFPX labeled '''MIC/SPEAKER A B C SP'''. The connections will be as follows; Red to A, Black to B, Common (bare wire) to C (See Picture) | ||
| − | #:[[File:Wired_up_IFPX.JPG|400x300px]] | + | #:[[File:Wired_up_IFPX.JPG|400x300px|link=https://ipivs.com/wiki/images/8/86/Wired_up_IFPX.JPG]] |
#Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place. | #Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place. | ||
Revision as of 13:33, 17 March 2021
Connecting the Microphone
- Strip the jacket off the 22/2, revealing the red, black, and common (bare wire) on both sides of the cable. Remove the string and plastic casings covering the red and black cables. Strip the red and black jackets off the wire exposing the copper. Cut copper evenly on both ends (See picture)
- Drill a hole into the piece of ceiling tile that you will be mounting the Louroe Verifact-A. Feed one end of the the 22/2 audio cable through the hole. Connect the audio cable to the Verifact-A phoenix terminal as follows; Red to A, Black to B, Common (bare wire) to C (See Picture)
- Connect the other end of your 22/2 cable to the terminal on the IFPX labeled MIC/SPEAKER A B C SP. The connections will be as follows; Red to A, Black to B, Common (bare wire) to C (See Picture)
- Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place.
