Difference between revisions of "Devices and Networking"
IVSWikiBlue (talk | contribs) (→Device Maintenance) |
IVSWikiBlue (talk | contribs) (→Device Information) |
||
| Line 13: | Line 13: | ||
==Device Information== | ==Device Information== | ||
| − | + | {{img | file = Tesira_Device_Information_2.png | width=900px}} | |
#Check the current firmware version | #Check the current firmware version | ||
#System ID for user interface configuration | #System ID for user interface configuration | ||
| − | |||
==Network Settings== | ==Network Settings== | ||
Revision as of 09:02, 10 May 2022
Use the following tools to find IP and System settings and Firmware information.
Device Maintenance
- Network settings- click here to set IP's
- Clear configuration- this will need to be done when sending a brand new config to the device
- Update firmware. Plan for this to take between 30-60 minutes. Also update the firmware for any remote devices; this will take about 10 minutes for each device
- System ID for user interface configuration
Device Information
- Check the current firmware version
- System ID for user interface configuration
Network Settings
- Assign IP’s here
- The Control and AVB ports will each have their own IP's. Switch between Control and AVB here
AVB Enable
- If using an AVB switch or any ancillary devices, enable AVB here
