Difference between revisions of "BEAM Sync Users Data"

From IVS Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
{{img with key | file = BEAM Server Information.png | list =   
 
{{img with key | file = BEAM Server Information.png | list =   
<li><b>Server address:</b> Enter the IP address or FQDN of the server. It must be entered as http://192.168.0.81 or https://192.168.0.81 if you are using SSL.</li>
+
<li><b>Server address:</b> Enter the IP address or FQDN of the server. It must be entered as http://192.168.0.81 or https://valt.ivs.com if you are using SSL.</li>
 
<li><b>Device UID:</b> You can obtain this by pulling up the iPad device on the server.</li>
 
<li><b>Device UID:</b> You can obtain this by pulling up the iPad device on the server.</li>
 
<li><b>Login:</b> Enter and admin account user here. This password should not change. It is good practice to create an account in VALT just for this purpose. <i>i.e: beamSyncUser</i></li>
 
<li><b>Login:</b> Enter and admin account user here. This password should not change. It is good practice to create an account in VALT just for this purpose. <i>i.e: beamSyncUser</i></li>
 
<li><b>Password:</b> Enter the password for the sync account here</li>
 
<li><b>Password:</b> Enter the password for the sync account here</li>
 
}}
 
}}

Latest revision as of 08:08, 27 July 2022

BEAM Server Information.png

  1. Server address: Enter the IP address or FQDN of the server. It must be entered as http://192.168.0.81 or https://valt.ivs.com if you are using SSL.
  2. Device UID: You can obtain this by pulling up the iPad device on the server.
  3. Login: Enter and admin account user here. This password should not change. It is good practice to create an account in VALT just for this purpose. i.e: beamSyncUser
  4. Password: Enter the password for the sync account here