Revision as of 10:40, 2 January 2023

Prerequisites

A windows computer with an ethernet port or a USB-C to ethernet adapter and Google Chrome
One or more IVS HDMI Encoders
A Power over Ethernet (PoE) drop
IPC Manager Software (only if configuring multiple encoders)

Unpack the contents of the Encoder Package.
Find the 12V power supply and the ethernet cable and connect both to the back of the encoder.
- Connect the Power brick of the 12V power supply to a 120V Outlet.
- Connect the other end of the ethernet cable to your computer directly or via a USB-C to ethernet adapter.
- The "Run" LED should light up blue as pictured once the encoder has powered up.
At this point we are ready to reconfigure the networking on your computer to connect to the encoder

On your computer, open control panel.
Search for and open Network and Sharing Center.
- Click on the active "Ethernet" Connection on the right.
- Within the Status popup window, click "Properties".
- Within the Properties popup window, double click "Internet Protocol Version 4 (TCP/IPv4)".
- Adjust the properties to match the picture below.
- Remember to come back and change all the settings back to automatic if you want your ethernet to work normally later!
- Click "OK" on this popup and the popup below it to apply the new settings
Navigate to http://192.168.1.120 in Google Chrome
Provide the default credentials of admin/12345 for the login popup that appears (pictured below)
If the Encoder Web Interface (pictured below) appears, you are ready to configure the Encoder!

@@ Line 27: / Line 27: @@
 # Navigate to http://192.168.1.120 in Google Chrome
 # Provide the default credentials of admin/12345 for the login popup that appears (pictured below)
-#:{{img | file = Encoder_WebLogin.png | width = 1000px}}
+#:{{img | file = Login.PNG | width = 1000px}}
 # If the Encoder Web Interface (pictured below) appears, you are ready to configure the Encoder!
-#:{{img | file = Encoder_LiveView.png | width = 1000px}}
+#:{{img | file = Home_Page.PNG | width = 1000px}}