Difference between revisions of "Bluetooth Talkback - Delete Pairings"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) |
||
| Line 4: | Line 4: | ||
<div class="section"> | <div class="section"> | ||
| − | *If the device is not already powered on, press and hold the POWER button for about 2 seconds to turn the device on. The LED will flash blue twice. | + | *If the device is not already powered on, press and hold the POWER button <b>(#2 Above)</b> for about 2 seconds to turn the device on. The LED will flash blue twice. |
*Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds to turn the device off. The LED will flash red twice. | *Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds to turn the device off. The LED will flash red twice. | ||
*Wait at least 3 seconds, then slide the TX/RX switch to the opposite position. | *Wait at least 3 seconds, then slide the TX/RX switch to the opposite position. | ||
Press and hold the POWER button to turn the device on. The LED will flash blue twice. All Bluetooth pairings are now cleared. | Press and hold the POWER button to turn the device on. The LED will flash blue twice. All Bluetooth pairings are now cleared. | ||
</div> | </div> | ||
Revision as of 16:46, 4 January 2023
Perform the following steps to delete any existing Bluetooth® pairings from memory.
- If the device is not already powered on, press and hold the POWER button (#2 Above) for about 2 seconds to turn the device on. The LED will flash blue twice.
- Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds to turn the device off. The LED will flash red twice.
- Wait at least 3 seconds, then slide the TX/RX switch to the opposite position.
Press and hold the POWER button to turn the device on. The LED will flash blue twice. All Bluetooth pairings are now cleared.
