Difference between revisions of "Test Network Connection"
IVSWikiBlue (talk | contribs) (Created page with "{{Article | content = </onlyinclude> The server talks to the cameras over two ports. The following instructions will show you how to test the communication over both ports. *...") |
(No difference)
|
Revision as of 10:08, 15 March 2024
The server talks to the cameras over two ports. The following instructions will show you how to test the communication over both ports.
- TCP 80 - HTTP
- TCP 554 - RTSP video
- SSH into the server
- Run the following command to check port communication
- nc -zv [CAMERA IP] [PORT]
- Example: nc -zv 192.168.0.90 80
- If communication is good it will say Succeeded!.
- If it fails it will say Connection Refused.
✎If it takes more than 5 seconds to give a response, the test will most likely timeout, and the connection is probably not good.
