Difference between revisions of "IVS Wiki:Configuring a Privacy Switch"

From IVS Wiki
Jump to: navigation, search
Line 41: Line 41:
 
</center>
 
</center>
 
</ol>
 
</ol>
 +
 +
{{Aside | content = Some cameras will only have ports 1 & 2.}}
 
}}
 
}}
  
 
{{hr}}
 
{{hr}}
  
−
{{Manual lvl 2 | title = Set the PTZ Presets | content = }}
+
{{Manual lvl 2 | title = Set the PTZ Presets | content =  
 +
If there are any PTZ cameras in the room, you will need to set the preset positions on those cameras.
 +
<ol>
 +
<li>Pan/Tilt/Zoom your camera to the desired angle.</li>
 +
<li>Go to <b>PTZ</b> &#x2192; <b>Preset Positions</b>.</li>
 +
<li>Select <b>Preset Positions</b> &#x2192; <b>Create preset position</b>.</li>
 +
{{Aside | content = The <b>Home</b> preset may already exist. If this is the case, hit the <b>Edit</b> button on the existing Home preset instead of creating a new preset.}}
 +
<li>Home Position</li>
 +
<li></li>
 +
<li></li>
 +
<li></li>
 +
</ol>
 +
}}
 
}}
 
}}

Revision as of 10:43, 31 March 2025

Prepare all Cameras

On each camera in the room:

  1. Set the I/O Ports
  2. Set the PTZ Presets
  3. Set the Privacy mask
  4. If applicable, set the privacy PTZ preset position


Set the I/O Ports

  1. Go to System → Accessories.
  2. Ensure that Ports 1 & 3 are set as Input and 2 & 4 are set as Output.
    3. Port 1 Input Port 2 Output
    Port 3 Input Port 4 Output

✎Some cameras will only have ports 1 & 2.

Set the PTZ Presets

If there are any PTZ cameras in the room, you will need to set the preset positions on those cameras.

  1. Pan/Tilt/Zoom your camera to the desired angle.
  2. Go to PTZ → Preset Positions.
  3. Select Preset Positions → Create preset position.

    4. ✎The Home preset may already exist. If this is the case, hit the Edit button on the existing Home preset instead of creating a new preset.

  4. Home Position
Retrieved from "https://ipivs.info/wiki/index.php?title=IVS_Wiki:Configuring_a_Privacy_Switch&oldid=15580"