IVS Wiki:VALT CUE

VALT CUE Installation

Add CUE device in VALT

1. The first step to implementing VALT CUE with your instance of VALT is setting up the device in the Settings page of VALT.
2. Navigate to the Rooms & Devices subsection and click the plus icon in the top right corner to Add CUE device.

✎You will need an additional device license for each VALT CUE device.

3. Input the appropriate Name, Media Server, and Device Type, and leave the Rooms field blank.
4. Hit the save button.

✎Be sure to navigate back to that device to take note of the Device UID, as this value will be used to connect the device to VALT later on.

Installing VALT CUE

Navigate to the App Store on the device. Search for IVS Cue and install the app.

Connecting VALT CUE to VALT

When you open the IVS Cue app, you will be prompted to Connect to a server. You will need to fill out the following values:

Server Address	Enter the IP address or FQDN of the server. It must be entered as http://<ipaddress> or https://<fqdn> if you are using SSL.
Device UID	You can obtain this by pulling up the iPad device on the VALT application's Settings page.
Username	This must be a user with administrator rights.
Password

VALT CUE Configuration

Step 2: Track Setup

Session Setup

Step 3: Room

Step 4: Information

Step 5: Evaluation template

Using VALT CUE Live