Changing Settings on the IVS BEAM App

1) Touch the gear in the upper left corner of the screen.

2) The current configuration will be displayed. Update the Server Address, Device UID, username and password as necesary

Server Address	Enter the IP address or FQDN of the server. It must be entered as http://192.168.0.81 or https://192.168.0.81 if you are using SSL
Device UID	You can obtain this by pulling up the iPad device on the server.
Username
Password

Note: If you are utilizing SSL, you must have a cert signed by a trusted CA in order to connect an iOS device.

3) Touch Sync User Data

4) You will now be prompted to enter your username. This should be the username of the individual that will be utilizing the device, as that is the user the videos will be stored under. The user can log out and another user can log in at any time.

5) Enter the username

6) Touch Login