Difference between revisions of "ST-ACR1"
IVSWikiBlue (talk | contribs) (Created page with "== Overview == The ST-ACR1 is an audio controlled relay that can be used to change the audio source base on audio input. For example the ST-ACR1 can be used to switch the aud...") |
IVSWikiBlue (talk | contribs) (→Connections) |
||
| Line 4: | Line 4: | ||
== Connections == | == Connections == | ||
| + | [[File:ST-ACR1.jpg|600x450px]] | ||
| − | + | :1) Line in Positive | |
| + | :2) Line in Negative | ||
| + | :3) Line in Ground | ||
| + | :4) Power Positive (24 Volt DC) | ||
| + | :5) Power Negative | ||
| + | :6) Slave Terminal | ||
| + | :7) Relay 1 Output | ||
| + | :8) Relay 1 Input 1 | ||
| + | :9) Relay 1 Input 2 | ||
| + | :10) Relay 2 Output | ||
| + | :11) Relay 2 Input 1 | ||
| + | :12) Relay 2 Input 2 | ||
== Example Install: Sim Room/Observation Room == | == Example Install: Sim Room/Observation Room == | ||
Revision as of 09:30, 4 November 2016
Overview
The ST-ACR1 is an audio controlled relay that can be used to change the audio source base on audio input. For example the ST-ACR1 can be used to switch the audio source for a camera when a microphone is activated.
Connections
- 1) Line in Positive
- 2) Line in Negative
- 3) Line in Ground
- 4) Power Positive (24 Volt DC)
- 5) Power Negative
- 6) Slave Terminal
- 7) Relay 1 Output
- 8) Relay 1 Input 1
- 9) Relay 1 Input 2
- 10) Relay 2 Output
- 11) Relay 2 Input 1
- 12) Relay 2 Input 2
