Difference between revisions of "Devices and Networking"

From IVS Wiki
Jump to: navigation, search
Line 2: Line 2:
  
 
[[File:Tesira_Device_Maintenance.png]]
 
[[File:Tesira_Device_Maintenance.png]]
#Network settings
+
 
#Clear configuration
+
#Network settings- click here to set IP's
#Update firmware
+
#Clear configuration- we will need to do this if we are sending a brand new config to the device
#System ID for Canvas solution
+
#Update firmware. Plan for this to take between 30-60 minutes
 +
#System ID for user interface configuration
 +
 
  
 
===Network Settings===
 
===Network Settings===
  
 
[[File:Tesira_Device_Information.png]]
 
[[File:Tesira_Device_Information.png]]
#Assign IP’s
+
 
 +
#Assign IP’s here
 
#Switch between Control and AVB
 
#Switch between Control and AVB
 +
  
 
===AVB Enable===
 
===AVB Enable===
  
 
[[File:Tesira_Network_Settings.png]]
 
[[File:Tesira_Network_Settings.png]]
#Click it
+
 
 +
#If we are using an AVB switch or any ancillary devices, enable AVB here
 +
 
  
 
===Device Information===
 
===Device Information===
  
 
[[File:Tesira_Device_AVB_Enable.png]]
 
[[File:Tesira_Device_AVB_Enable.png]]
#Firmware version
+
 
#System ID for Canvas solution
+
#Check the current firmware version
 +
#System ID for user interface configuration

Revision as of 10:58, 21 April 2020

Device Maintenance

Tesira Device Maintenance.png

  1. Network settings- click here to set IP's
  2. Clear configuration- we will need to do this if we are sending a brand new config to the device
  3. Update firmware. Plan for this to take between 30-60 minutes
  4. System ID for user interface configuration


Network Settings

Tesira Device Information.png

  1. Assign IP’s here
  2. Switch between Control and AVB


AVB Enable

Tesira Network Settings.png

  1. If we are using an AVB switch or any ancillary devices, enable AVB here


Device Information

Tesira Device AVB Enable.png

  1. Check the current firmware version
  2. System ID for user interface configuration