Difference between revisions of "User Interface Microphone Selector"
IVSWikiBlue (talk | contribs) (→Tesira Software) |
IVSWikiBlue (talk | contribs) (→Tesira) |
||
| Line 18: | Line 18: | ||
There will be 4 components of interest in the Tesira config. | There will be 4 components of interest in the Tesira config. | ||
| − | [[File: | + | [[File:Channel_Selector_Source_Block.png]] |
Revision as of 12:46, 30 April 2020
Description/Objective
The Biamp Canvas User Interface software will allow us to give our customers access to almost any parameters in the Tesira configuration. One of two main use cases for IVS customers will be a microphone selector - the ability to select between multiple microphones to listen for observation.
In this section, we will build the corresponding Canvas UI for the Microphone Selector Tesira config. There are 16 cameras, each with their own microphone, and an adjacent observation room with 2 OWISP speakers. The customer would like to solo one mic at a time through their overhead speakers, mute all mics, and adjust the speaker levels.
Physical Wiring
Physical wiring and the line diagram is available in the Tesira config section for this example, so this should already be complete.
The only other thing to keep in mind is: The computers with the Biamp UI will need to be able to reach the Tesira on the network. This should not typically be an IVS task, and should be up to the customer.
Components
Open the Microphone Selector Tesira configuration.
Tesira
There will be 4 components of interest in the Tesira config.
