Difference between revisions of "Template:3235 Reassemble the Camera"

From IVS Wiki
Jump to: navigation, search
(Created page with "===Reassemble the Camera=== #Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place. #:''Note:'' Be sure when tightening the dome to not cause t...")
 
(No difference)

Latest revision as of 09:08, 12 May 2020

Reassemble the Camera

  1. Place the dome over on the camera. Using the T20 bit, tighten the dome cover in place.
    Note: Be sure when tightening the dome to not cause the camera to move.
  2. Remove protective plastic from the camera dome