Add iPad to VALT

1. Go to the Admin section and click Rooms & Cameras
2. From there click on Add Device

You will then be prompted to fill out the appropriate information for the device you are adding.

1. Name: You should give the device a unique name that is easily identifiable.
2. Type: This area allows you to select the type of device you are adding.
3. Rooms: This is where you can select the room for the iPad. Most iPads are used in many different rooms. It is recommended to create a separate room for each mobile device.
4. Media Server: The area allows you to select the server that will store the recorded video. In many cases, localhost is used.

1. Device UID:
2. Link Status:
3. Status:

1. Name:
2. Type:
3. Rooms:
4. Media Server