Restarting Wowza
Revision as of 07:48, 3 February 2017 by IVSWikiBlue (talk | contribs)
Please note restarting the Wowza engine will disconnect any active observation session and stop any active recordings. It is best to perform this reset when no recordings are in progress.
1) Enter the ipaddress or url of the Valt server followed by :8088 example: "http://192.168.0.70:8088" 2) Enter the log in credentials for Wowza manager application. If you do not have these you can email support at support@ipivs.com
3) You should see the diagnostic screen shown above.
4) Click on the server tab on top, then click the "Restart" button as shown above.
5) Click OK to restart the Wowza video engine.
