Anchor AN30
Revision as of 09:42, 6 May 2019 by IVSWikiBlue (talk | contribs)
Connect an Anchor AN-30 speaker to a Louroe IF-PX
Single Camera
- Plug a 3.5 mm audio splitter into the the AUDIO OUT port on the IF-PX.
-
- Plug a 3.5 mm audio cable into the audio splitter.
-
- Plug the other end of the 3.5 mm audio cable into the AUDIO IN (red) port of the camera.
-
- Plug another 3.5 mm audio cable into the audio splitter.
-
- Plug the other end of that 3.5 mm audio cable into the Line In port on the Anchor AN-30 speaker.
-
The devices should now be connected, as shown in the picture below:
