Mounting Instructions

Required Parts and Tools

• Epiphan DVI/HDMI Encoder
• (4) 1-1/2" corner mounting brackets (mounting screws included)
• M3x20 Phillips pan machine screws
• SAE #6 flat washers
• Measuring tape
• Level
• Small screwdriver
• Drill and drill bit

Installation Instructions

1. Determine the mounting location for the encoder. Generally, it will be mounted under a desk or table near the control work station.
2. Ensure that the mounting location allows the video cable and Ethernet cables to reach the encoder unit
3. Once the location is determined. Measure out the appropriate distance for mounting the four corner brackets
   • 3-3/8" between each pair of brackets
   • 7" vertically between both pairs

   

4. Using a measuring tape and level, mark the four mount post locations
5. Using the screws provided with the corner brackets, install the four mount posts

   

6. Carefully remove the existing screws from the housing of the encoder

   

7. Using screws and washers, attach the encoder to the mounting posts

   

8. Connect the Ethernet cable and respective video cable to the proper connection port.