Template:3235 Drop Ceiling Mounting

From IVS Wiki
Revision as of 08:45, 27 August 2020 by IVSWikiBlue (talk | contribs) (Drop Ceiling Mounting Instructions)
Jump to: navigation, search

Drop Ceiling Mounting Instructions

  1. If mounting to drop ceiling, determine where the camera will be located on the tile. Ensure that there will be clearance on the tile to secure the dome in place.
  2. Using two toggle bolts, secure the mount plate.
    3245dropC2.JPG
  3. Using a 1" paddle bit, drill a hole centered in the opening of wall plate. This is where cables will pass through.
    3245dropCHole2.JPG
  4. Cut two lengths of 22/2 long enough to reach the mounting location of the microphone.
  5. Using glow rods or fish tape, fish the network drop and 2 sections of 22/2 audio cable into the drop ceiling.
  6. Attach camera to mount plate.

Note: Be careful not to press too hard and damage the ceiling tile