Template:3235 Aim the Camera

From IVS Wiki
Revision as of 14:53, 10 May 2022 by IVSWikiBlue (talk | contribs) (→‎Aim the Camera)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Aim the Camera

  1. In order to aim the camera, it will need to be accessed via the Axis web portal.
  2. If the camera is being powered off the network, run Axis IP utility in order to discover the camera. Clicking the IP address will route to the Axis web portal
    IPutility.jpg
  3. If that does not work then use a POE injector to connect to the camera and the default IP. (default Axis IP = 192.168.0.90)
  4. Using a laptop/PC, enter the IP address assigned to the camera into a web browser.
    WebPortalLogIn.jpg
  5. Using the IVS admin credentials, log into the camera.
    User: root
    Password: admin51
  6. Once in the Axis web portal, activate the camera live view.
    PreLiveMode.jpg Liveview.jpg
  7. Begin by manually adjusting camera's viewing area using the manual tilt and focus mechanisms on the camera.
    3235rotation.jpg
  8. Using the digital zoom function in the web portal, make any other adjustments needed.
  9. The image field may also be rotated in the web portal if necessary.
    LiveviewRotate.jpg
  10. Be sure to click the Autofocus button. This will focus the camera and ensure that the autofocus is properly functioning.
    LiveAutoFocus.jpg
    Note: This must be done before securing the dome.
Retrieved from "https://ipivs.info/wiki/index.php?title=Template:3235_Aim_the_Camera&oldid=9190"