Devices and Networking

Use the following tools to find IP and System settings and Firmware information.

Device Maintenance

1. Network settings- click here to set IP's
2. Clear configuration- this will need to be done when sending a brand new config to the device
3. Update firmware. Plan for this to take between 30-60 minutes. Also update the firmware for any remote devices; this will take about 10 minutes for each device
4. System ID for user interface configuration

Device Information

1. Check the current firmware version
2. System ID for user interface configuration

Network Settings

1. Assign IP’s here
2. The Control and AVB ports will each have their own IP's. Switch between Control and AVB here

AVB Enable

1. If using an AVB switch or any ancillary devices, enable AVB here