Add iPad to VALT
Revision as of 17:03, 27 July 2022 by IVSWikiBlue (talk | contribs)
1) Go to the Admin section and click Rooms & Cameras
2) Click on Add Device
- Rooms & Cameras: Clicking this will open the list of rooms and devices.
- Add Device: Clicking this will allow you to enter information for a new device.
3) Fill out the appropriate information for the device you are adding.
- Name: You should give the device a unique name that is easily identifiable.
- Type: This area allows you to select the type of device you are adding.
- Rooms: This is where you can select the room for the iPad. Most iPads are used in many different rooms. It is recommended to create a separate room for each mobile device.
- Media Server: This area allows you to select the server that will store the recorded video. In many cases, localhost is used.
4) Click Save 5) You will need
- Device UID: This ID is used to sync the device with VALT.
- Link Status: This area shows if the device is linked to VALT.
- Status: This area indicates if the device is currently streaming and connected to VALT.
- Name: Displays the current name, and allows you to change it.
- Type: Displays the current device type, and allows you to change it.
- Rooms: Displays the current Room/Rooms the device is in, and allows you to change it.
- Media Server Displays the current server the device is storing videos to, and allows you to change it.