Camera Settings
Revision as of 08:14, 17 April 2024 by IVSWikiBlue (talk | contribs)
Below are the settings that IVS sets when shipping out cameras.
| Setting | Description | Value | Notes |
|---|---|---|---|
| Audio.A0.Enabled | Enable audio in the Axis product. | yes | |
| AudioSource.A0.InputGain | Applied gain (in dB) to sound sent from the Axis product. | 0 | |
| AudioSource.A0.OutputGain | Applied gain (in dB) to sound sent to the Axis product. | 0 | |
| AudioSource.A0.AudioSupport | Enable/disable audio from this audio source. If the audio source is turned off with this parameter, no audio will be transmitted even if Audio.A0.Enabled=yes |
yes | |
| AudioSource.A0.BitRate | The output bit rate (in bits per second). | 32000 | This setting can vary between cameras |
| AudioSource.A0.InputType | The source from where the audio is captured. | line | |
| AudioSource.A0.SampleRate | Clock rate (in Hz) for the audio sampling. | 48000 | This setting can vary between cameras |
| Image.I0.MPEG.PCount | Number of P frames that make up the GOP. | 19 | |
| Image.I0.MPEG.ZStrength | Provides various methods for reducing the video bitrate. | off | |
| Image.I0.Stream.FPS | Sets the number of Frames Per Second | 30 | |
| Network.HTTP.AuthenticationPolicy | basic | Needed for many VALT accessories to work. | |
| Image.I0.MPEG.H264.Profile | main |
