Add iPad to VALT

1) Go to the Admin section and click Rooms & Cameras
2) Click on Add Device

1. Rooms & Cameras: Clicking this will open the list of rooms and devices.
2. Add Device: Clicking this will allow you to enter information for a new device.

3) Fill out the appropriate information for the device you are adding.

1. Name: You should give the device a unique name that is easily identifiable.
2. Type: This area allows you to select the type of device you are adding.
3. Rooms: This is where you can select the room for the iPad. Most iPads are used in many different rooms. It is recommended to create a separate room for each mobile device.
4. Media Server: This area allows you to select the server that will store the recorded video. In many cases, localhost is used.

4) Click Save

1. Device UID: This ID is used to sync the device with VALT.
2. Link Status: This area shows if the device is linked to VALT.
3. Status: This area indicates if the device is currently streaming and connected to VALT.

1. Name:
2. Type:
3. Rooms:
4. Media Server