VALT POC System Variants
Contents
VALT POC Appliance
The appliance comes preconfigured with the default IP address of 192.168.5.2.
The appliance can be reconfigured with a new IP address to connect it to your network using the command line menu. Connect a keyboard and monitor to the appliance, then follow the instructions in the URL below:
VALT POC Virtual Appliance
Instructions for downloading and installing the VALT virtual appliance can be found at the following URLs:
The appliance comes preconfigured with the default IP address of 192.168.0.99.
The appliance must be reconfigured with a new IP address to connect it to your network using the command line menu. Follow the instructions in the URL below:
VALT POC Camera and Stand
It includes the following components.
- Axis P5414-E Pan Tilt Zoom Camera
- Axis P3245 Fixed Dome Camera
- Axis 30W POE injector
- Shure MX395 Microphone
- VALT Scheduler
- VALT Start/Stop Button
- VALT Privacy Switch
- VALT Keypad
- Door Controller
- 8 port switch
- Axis A1001 Door Controller
- Epiphan Encoder
- ASUS Computer
- RDL STM-1
- RDL ST-DA3
- Ubiqui Access Point
- 2 System fans
All the components are pre-wired and the system ships ready to connect to your network. The system also includes an audio jack that can be connected to headphones or a speaker to demonstrate the VALT software's talkback capability.
The camera has a default IP address of 192.168.5.3.
VALT POC Wireless AP
This wireless access point has a default IP address of 192.168.5.4.