Pairing Bluetooth Talkback

From IVS Wiki
Revision as of 11:06, 12 December 2022 by IVSWikiBlue (talk | contribs) (Undo revision 10777 by IVSWikiBlue (talk))
Jump to: navigation, search

Pairing Devices

  1. If the Bluetooth unit is powered on, press and hold the power button to turn off the device. The LED on the unit will flash red twice.
  2. Wait at least three seconds and then slide the TX/RX switch to the TX position
  3. Press and hold the power button to turn the unit back on. The LED will flash blue twice
  4. Press the "Pair" button. The LED will begin to rapidly flash blue to indicate the device is paired in TX mode.
  5. Power the audio device that will be receiving signal and place it in its Bluetooth pairing mode. The devices will pair and connect within five to thirty seconds and the LED will slowly blink blue when connected
Retrieved from "https://ipivs.info/wiki/index.php?title=Pairing_Bluetooth_Talkback&oldid=10778"