Bluetooth Talkback - Delete Pairings
Revision as of 17:41, 4 January 2023 by IVSWikiBlue (talk | contribs)
Perform the following steps to delete any existing Bluetooth® pairings from memory.
- If the device is not already powered on, press and hold the POWER button for about 2 seconds to turn the device on. The LED will flash blue twice.
- Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds to turn the device off. The LED will flash red twice.
- Wait at least 3 seconds, then slide the TX/RX switch to the opposite position.
Press and hold the POWER button to turn the device on. The LED will flash blue twice. All Bluetooth pairings are now cleared.
