ROAM Bridge

ROAM Bridge

General Information

The ROAM Bridge is used to connect the wireless ROAM Cart to a wireless network.

⚠The wireless network that this bridge connects to will need to be able to talk to VALT. For more, see our Network Requirements.

---

Physical Device

---

Accessing the ROAM Bridge

To access the ROAM Bridge, it must be powered and connected to the network.

✎If you are configuring the bridge for the first time, you will access the device by opening the ROAM Cart and connecting a laptop or computer directly to port 3 or 4.

Once connected, please navigate to the IP of the bridge, and enter the credentials.

The default IP address will be 192.168.1.20

---

🕮Click here for a walkthrough of the ROAM Bridge configuration.

---

The default administrative credentials are:

User:

admin

Password:

admin51

⇧ Back to Top

---

Configure Wireless

🕮To the left of wifi1, you will see a button with [E] or [D]. Make sure this is showing a [D]. This means that is is enabled. The letter D is prompting you to disable wifi1.

1. Select Wireless.
2. Click on wifi1.

---

1. Scroll down to Configuration.
2. Under SSID select the wireless network you are going to connect to.

---

Configuring Security

⚠Additional required settings will depend on the network's configuration.

We recommend consulting the network administrator to gather these details.

⇧ Back to Top

---

Locate DHCP Address of the Bridge

1. Navigate to IP.
2. Click on DHCP Client.

   From there, you will see the IP Address for wifi1.

⇧ Back to Top