ROAM Bridge
Contents
ROAM Bridge
General Information
The ROAM Bridge is used to connect the wireless ROAM Cart to a wireless network.
⚠The wireless network that this bridge connects to will need to be able to talk to VALT. For more, see our Network Requirements.
Physical Device
Accessing the ROAM Bridge
To access the ROAM Bridge, it must be powered and connected to the network.
✎If you are configuring the bridge for the first time, you will access the device by opening the ROAM Cart and connecting a laptop or computer directly to port 3 or 4.
Once connected, please navigate to the IP of the bridge, and enter the credentials.
The default IP address will be 192.168.1.20
🕮Click here for a walkthrough of the ROAM Bridge configuration.
- User:
- admin
- Password:
- admin51
Configure Wireless
🕮To the left of wifi1, you will see a button with [E] or [D]. Make sure this is showing a [D]. This means that is is enabled. The letter D is prompting you to disable wifi1.
- Select Wireless.
- Click on wifi1.
- Scroll down to Configuration.
- Under SSID select the wireless network you are going to connect to.
Configuring Security
⚠Additional required settings will depend on the network's configuration.
You will need to consult the network administrator to gather these details.
Locate DHCP Address of the Bridge
- Navigate to IP.
- Click on DHCP Client.
- From there, you will see the IP Address for wifi1.
