Camera Settings 7+

The following camera settings should be enabled prior to adding the camera to the Valt system.

1) Browse to the camera address (you can find the camera address using the Axis IPUtility.exe application) and set the root password.

2) Click on the setup link in the lower right corner.

3) Click on the stream tab then enable audio using the slider button (ensure audio format is set to AAC) as shown below then press Save.

4) Click on the audio settings section (using chrome) and ensure an signal is present using audio indicator. When no one is speaking audio should be -40 to -30 db when someone is speaking audio should be -20 to -5 db.

5) For proper I/O and talkback functionality when using cameras with Axis firmware version 5.70 or greater:

Under Settings --> System Options --> Security --> Users you will need to set Allow password type to Unencrypted only as shown below.

After this change you will need to restart the camera.

6)

7)