Installing Overhead Speaker on Axis Cameras with Phoenix Connector

From IVS Wiki
Revision as of 09:24, 19 April 2019 by IVSWikiBlue (talk | contribs) (Created page with "==Required Parts And Tools== * Axis P5414-E 100x100px * Amplified Overhead Speaker (Any speaker will due, however, we recommend the OWI-AMPR2SIC5 and will be...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Required Parts And Tools

  • Axis P5414-E P54.jpg
  • Amplified Overhead Speaker (Any speaker will due, however, we recommend the OWI-AMPR2SIC5 and will be the speaker referenced in these instructions)In Ceiling Speakers.jpg
  • 22/2 audio cable Stripped 22 2 Wire.JPG
  • Fish Tape or Glow Rod 15-4-57-m-mid-flex-glow-rod-set-tools-to-k56415-to-k56415-19671-228x228.jpg
  • Electrical Tape
  • Wire Stripper Wire Stripper and Starbit Driver.JPG

Installation Instructions

  1. Once your camera is installed, locate the AUDIO OUT on your P5414E.
  2. Strip the jacket of the 22/2 cable revealing the red, black, and bare wires inside. Cut away the plastic surrounding the cable inside. Strip away a small piece of the red and black jackets revealing the bare copper wire.
  3. Wire the black and bare to the - and the red to the + of the AUDIO OUT of the P5414E phoenix connector.
  4. In this step, you want to run your 22/2 cable from the camera to your AMP2SIC5, wiring your red wire to the + phoenix connection and black to the - connection of the LINE INPUT of the AMP2SIC5 (See pics).
  5. Once audio is plugged in, locate your run 18/2 from the AMP2SIC5 to its designated power outlet. Test the talkback unit is working by activating the talkback function within the Valt Software by having a partner use their computer microphone to communicate with you.

Talkback Turn On.jpg

Retrieved from "https://ipivs.info/wiki/index.php?title=Installing_Overhead_Speaker_on_Axis_Cameras_with_Phoenix_Connector&oldid=3332"