Devices and Networking
Revision as of 11:02, 21 April 2020 by IVSWikiBlue (talk | contribs)
Use the following tools to find IP and System settings and Firmware information.
Device Maintenance
- Network settings- click here to set IP's
- Clear configuration- we will need to do this if we are sending a brand new config to the device
- Update firmware. Plan for this to take between 30-60 minutes
- System ID for user interface configuration
Network Settings
- Assign IP’s here
- Switch between Control and AVB
AVB Enable
- If we are using an AVB switch or any ancillary devices, enable AVB here
Device Information
- Check the current firmware version
- System ID for user interface configuration