Installing an Axis P5414/P5415 with a Tesira Forte DSP

Required Parts And Tools

• Axis P5415 or P5415
• T20 Torx security bit
• T10 Torx Security bit
• Wire Stripper
• Wall Dogs (if mounting to concrete) (7/8")
• Screws and Anchors (7/8")
• 1/2" paddle bit
• Toggle Bolts (If mounting mic to drop ceiling tile) (3/16")
• Drill bit and drill
• Phillips head drill bit or Phillips head screwdriver
• Small Flat head screwdriver (#3)
• Hole Saw (2")
• B Connectors
• Stud Finder
• Cat5/6 Patch Cable (7ft-15ft recommended)
• Shielded Stranded 22/2 +ground Wire
• Fish Tape or Glow Rods
• Biamp Tesira Forte unit
• Biamp ceiling microphone