Template:3235 Connect Wiring

From IVS Wiki
Revision as of 09:09, 12 May 2020 by IVSWikiBlue (talk | contribs) (Created page with "===Connect Wiring=== #Connect patch cable into the Ethernet port on the Axis P3235. #:''Note:'' When connected, activity will be visible on the link lights. If no link lights...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Connect Wiring

  1. Connect patch cable into the Ethernet port on the Axis P3235.
    Note: When connected, activity will be visible on the link lights. If no link lights appear, ensure that POE is enabled on the POE switch and that the network drop is plugged in. After approximately one minute, all three LEDs should be green.
  2. At the camera, connect the power cable to the I/O phoenix connector (Red to 2, Black to 1). Connect the audio cable to the audio terminal block (Red to 3, Black to 1)
    3245 audio2.jpg 3245power2.jpg
Retrieved from "https://ipivs.info/wiki/index.php?title=Template:3235_Connect_Wiring&oldid=6249"