Template:P3245LV Required Parts and Tools MX202i
Revision as of 10:33, 13 May 2020 by IVSWikiBlue (talk | contribs) (Created page with "==Required Parts And Tools== * Axis P3245-LV * RDL STM-1 * Female XLR Pigtail * Shure MX202i Microphone * T20 Torx security bit * T10 Torx security bit * Wire...")
Required Parts And Tools
- Axis P3245-LV
- RDL STM-1
- Female XLR Pigtail
- Shure MX202i Microphone
- T20 Torx security bit
- T10 Torx security bit
- Wire Stripper
- Tap-Cons (if mounting to concrete) (7/8")
- Screws and Anchors (7/8")
- 1/2" paddle bit
- 1 blank single gang wall plate
- Toggle Bolts (for mic mount) (3/16")
- Drill bit and drill
- Phillips head drill bit or Phillips head screwdriver
- Small Flat head screwdriver (#3)
- Hole Saw (2")
- B Connectors
- Stud Finder
- Cat5/6 Patch Cable (7ft-15ft recommended)
- Shielded Stranded 22/2 + ground Wire
- Fish Tape or Glow Rods
- Wind Screen (Inside MX202i kit)
- Rubber Stopper (Inside MX202i kit)
- 4 pin XLR-M to XLR-M Adapter (Inside MX202i kit)