Template:Load Privacy Rules for Additional Cameras
Revision as of 15:56, 2 December 2020 by IVSWikiBlue (talk | contribs) (Created page with "In cases where there are multiple cameras in a room, the main camera (connected to the privacy switch) will need to send commands to the other cameras to enable their privacy....")
In cases where there are multiple cameras in a room, the main camera (connected to the privacy switch) will need to send commands to the other cameras to enable their privacy. The rules below should be loaded onto the main camera as many times as there are additional cameras. Change the events to have the correct recipient.
Axis P1365 Mk II 8.40.1.cfg
- Axis P3245-LV 9.80.1.1.cfg
- Axis P3365 6.50.2.3.cfg
- Axis P3375-V 8.40.4.cfg
- Axis Q3505 Mk II 8.30.1.cfg
- Axis Q3518 9.30.1.cfg
- Axis P3935-LR 9.80.1.cfg
- Axis F41 6.50.2.3.cfg
- Axis P5415-E 6.50.2.3.cfg
- Axis M5525-E 8.30.1.cfg
- Axis P5635-E Mk II 8.40.1.cfg
- Axis Q8414-LVS 6.50.3.cfg
